Concora Medium Fluter

For the packaging industries, it is always critical to perform some rigorous testing of materials as well as products to ensure that the packaging of the products is always having the best quality. The products must be packaged properly to ensure that they remain safe and fresh for a long time. The strength and quality of the packaging materials always hold a great responsibility for the safety of the products. There are many sorts of packaging in the market used for different kinds of products such as corrugated boxes, Concora Medium Fluter airtight containers, PET bottles, polythene bags, etc. All these kind of products undergo proper quality testing procedures so that it can be-be ensured that the customers get only the high-quality products, and the products remain safe during the whole course of transportation and warehousing. Below are some of the discussed testing methods used for quality assurance of packaging products in the industries.

Concora Medium Fluter

Compression test
A compression test is an always considered as a major test that is conducted on the packaging boxes. As the packaging boxes undergo very- high compressive forces during transportation and warehousing, it is always essential to test their compressive strength so that it could be assessed whether the box will be able to survive the whole journey or not. The box compression tester is standard for using to test the compressive power of a corrugated box or carton. The computerized box compression tester is considered as an extremely advanced instrument which gives exact and accurate testing results.

Edge crush test
The edge crush test is commonly used for testing the strength of the walls of a corrugated box. The given strength of the corrugated box greatly depends on the strength of the walls. The test is meant to determine the resistance offered by the corrugated board against the crushing forces. This test is very helpful in the determination of the maximum value of crushing that a box can bear during its use and hence can be useful for prediction of the suitability of a particular packaging material for a particular application. For the best and most precise test results, an edge crush tester is used. This same instrument can also be used for performing ring and flat crush testing as well.

Cobb Sizing Tester


Cobb Sizing Tester
The Cobb sizing test is used to evaluate the amount of water that can be absorbed by a corrugated box during usage. This helps in studying the effect of moist working conditions on the products.

Along with these, there is a dart impact test, vibration test, bursting strength test, puncture resistance test, and many others are also used for proper evaluation of the force of the products. With these testing operations, it has become very easy to ensure the best quality of the products comes with the best quality of packaging.

For More Details:
http://www.uecin.com/

Comments

Post a Comment

Popular posts from this blog

Paper Testing and Core Compression Process

Image
Core Compression Tester is an instrument used for testing the core collapsing strength. It has adjustable testing area to accommodate specimen of all sizes and shapes. Motor operated piston apply uniform pressure to crush the test sample. They have the maximum peak crush value recorded on digital load indicator. It is required to fulfill the basic need of quality control and development for manufacturers and users of Cone/ Core. An electronic instrument to measure and directly indicate the Compression Strength of Cone or Core. The core compression strength of core pipes is the maximum compressive force that a test piece collapses under constant load. Pneumatically operated piston apply the pressure. Maximum pressure to crush the test sample recorded on a gauge with peak pointer. Has adjustable testing area to accommodate specimen sizes and shapes. Some Paper Testing Equipments : THICKNESS MICROMETER: This instrument is used for testing the core collapsing stren...
Read more

The Role of Wood Chip Classifier in Production of Good Quality Paper

Image
Pulp testing equipments are most critical aspects of paper making. The instruments that compromise this section of the catalogue is designed specifically for the analysis of different raw materials. These pulp testing instruments are used in research, development, alteration of pulp characteristics of optimizing paper and studying of board product properties before going into commercial production. Woodchipclassifier is a pulp testing instrument that is used for quick and reproducible determining the mean thickness and thickness distribution of wood chips intended for the production of chemical or mechanical pulps. A wood chip classifier has 5 standard screens and a fines pan. The light weight standard screens are made of stainless steel and aluminum for easy handling.   The light weight screens are mounted on the shaking table.     Wood chip classifiers are designed for rapid, reproducible and accurate classification of wood chips. A good quali...
Read more

Ring Crush Tester and Cobb Sizing Tester

The ring crush test (RCT) is an optimal instrument used to evaluate the ring crush resistance of a paper strip formed into a ring with some standard length and width. This test is performed to the strict standards of ISO 12192 and TAPPI T 822.  The ring crush tester is pretty similar to the test of short-span compression. The strength of the liner or fluting is determined both in the machine direction which placed perpendicular to it. It is mandatory that force application is placed perfectly to the specimen in the exact perpendicular while performing these tests. The outcome of this test highly relies on proper specimen preparation. Specimen and guides must be placed exactly parallel to ensure highly precise determination of ring crush strength. As the ring crush test gives information about how specimen buckling acts like be rather than crush behavior, it is being replaced by the short-span compression test these times. Ring Crush Test (RCT) with a professional...
Read more