DEVICES WHICH HAS BROUGHT A REVOLUTION IN THE RAW MATERIAL INDUSTRY



Technology is all about reducing manpower, so the moto is to invest less sleep and get maximum output. With this agenda, the two most highly useful gadgets have been introduced about which we are going to discuss in detail here.

The first device is Internal Ply Bond Tester.


●        This one is basically a kind of measurement device with which you can compare the inner strength of any material like a bunch of papers, some laminates, and even paper boards.
●        It is usually measured that altogether two thousand ft. pound energy is generally required 2 separate a pile of the specimen into two.
●        The specimen preparation unit consists of five numbers which allow the device to experiment on various thicknesses of the specimen.
●        Commonly the device is weighted as 77kgs and the dimension is determined to be 77×40×72 cm.

The second device is K Bar Coater


●        With the help of this device, we can apply any liquid on a surface, in short coat it without using physical labour.
●        Using this machine mainly varnishes, Paints and adhesives are applied on wood or other services to increase their sustenance. To do this there is an incredible machinery of the metallic bar which is perfectly wounded by wire.
●        If the device is used under preferable comedy and the speed of the device can be increased at a rate of 15 mm/min.
●        The number of coating rods is 7, which allows the device to control the amount of coating to be put on the surface. Generally, an area of (27×15) cm can be coated at a time using this machine.

If you want to know more about the productivity of both these machines, then you can always take help from the internet. There you will find much information about these. 

Contact us:+91-132-2642527

Comments

Post a Comment

Popular posts from this blog

Paper Testing and Core Compression Process

Image
Core Compression Tester is an instrument used for testing the core collapsing strength. It has adjustable testing area to accommodate specimen of all sizes and shapes. Motor operated piston apply uniform pressure to crush the test sample. They have the maximum peak crush value recorded on digital load indicator. It is required to fulfill the basic need of quality control and development for manufacturers and users of Cone/ Core. An electronic instrument to measure and directly indicate the Compression Strength of Cone or Core. The core compression strength of core pipes is the maximum compressive force that a test piece collapses under constant load. Pneumatically operated piston apply the pressure. Maximum pressure to crush the test sample recorded on a gauge with peak pointer. Has adjustable testing area to accommodate specimen sizes and shapes. Some Paper Testing Equipments : THICKNESS MICROMETER: This instrument is used for testing the core collapsing stren...
Read more

The Role of Wood Chip Classifier in Production of Good Quality Paper

Image
Pulp testing equipments are most critical aspects of paper making. The instruments that compromise this section of the catalogue is designed specifically for the analysis of different raw materials. These pulp testing instruments are used in research, development, alteration of pulp characteristics of optimizing paper and studying of board product properties before going into commercial production. Woodchipclassifier is a pulp testing instrument that is used for quick and reproducible determining the mean thickness and thickness distribution of wood chips intended for the production of chemical or mechanical pulps. A wood chip classifier has 5 standard screens and a fines pan. The light weight standard screens are made of stainless steel and aluminum for easy handling.   The light weight screens are mounted on the shaking table.     Wood chip classifiers are designed for rapid, reproducible and accurate classification of wood chips. A good quali...
Read more

Ring Crush Tester and Cobb Sizing Tester

The ring crush test (RCT) is an optimal instrument used to evaluate the ring crush resistance of a paper strip formed into a ring with some standard length and width. This test is performed to the strict standards of ISO 12192 and TAPPI T 822.  The ring crush tester is pretty similar to the test of short-span compression. The strength of the liner or fluting is determined both in the machine direction which placed perpendicular to it. It is mandatory that force application is placed perfectly to the specimen in the exact perpendicular while performing these tests. The outcome of this test highly relies on proper specimen preparation. Specimen and guides must be placed exactly parallel to ensure highly precise determination of ring crush strength. As the ring crush test gives information about how specimen buckling acts like be rather than crush behavior, it is being replaced by the short-span compression test these times. Ring Crush Test (RCT) with a professional...
Read more